ASA-2687V3-HFT V1 High Frequency Trading Server

ASA-2687V3-HFT V1 High Frequency Trading 1U Server

SKU: ASA-2687V3-HFT V1

• Optimized for Low-Latency/Low-Jitter applications with
   BIOS optimizations and higher core count 160W CPUs
   (10 cores per CPU)
• Pre-installed w/ accelerated dual E5-2687 v3 CPUs and
   8x 8GB DDR4 DIMMs (64GB total)
• 8x 2.5" Hot-swap SAS3 + 2x SATA3 or 2x Optional NVMe via AOC
• 16x DIMM slots; up to 1TB DDR4
• 2x PCI-E 3.0 x16 (FHFL), 2x PCI-E 3.0 x8 (LP, 1 SAS3 integrated)
• I/O ports: 4x GbE, 1x Video, 1x COM/Serial, 5x USB 3.0

• System management: Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with dedicated LAN port
• 8x heavy duty fans w/ optimal fan speed control
• 750W Redundant Platinum Level Power Supplies
• Hyper-Speed hardware acceleration technology

Starting Configuration: $9,425.00

Processor/Cache

CPU

Intel Xeon processor E5-2687W v3

Dual Socket R3 (LGA 2011)

System Bus

QPI up to 9.6 GT/s

System Memory

Memory Capacity

8 X 8GB DDR4 2133MHz (Default)

16x 288-pin DDR4 DIMM slots

Up to 1TB ECC LRDIMM, 768GB ECC RDIMM

Memory Type

2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

RDIMM: 32GB, 16GB, 8GB, 4GB

LRDIMM: 64GB, 32GB

Memory Voltage

1.2 V

Error Detection

Corrects single-bit errors

On-Board Devices

Chipset

Intel C612 Express chipset

SAS

LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support

SATA

SATA3 (6Gbps) with RAID 0, 1, 5, 10

IPMI

Support for Intelligent Platform Management Interface v.2.0

IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Graphics

ASPEED AST2400 BMC

Input / Output

SAS

8x SAS3 (12Gbps) ports

SATA

2x SATA3 (6Gbps) ports

NVMe

2x NVMe ports support via optional Add-on Card (AOC-SLG3-2E4)

LAN

4x RJ45 Gigabit Ethernet ports

1x RJ45 Dedicated IPMI LAN port

USB

5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)

Video

1x VGA Connector

Serial Port / Header

1x Fast UART 16550 serial

1x COM port (rear)

System BIOS

BIOS Type

128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

Plug and Play (PnP)

APM 1.2

PCI 2.3

ACPI 1.0 / 2.0 / 3.0 / 4.0

USB Keyboard support

SMBIOS 2.7.1

UEFI 2.3.1

Chassis

Form Factor

1U Rackmount

Dimensions and Weight

Height

1.7" (43mm)

Width

17.2" (437mm)

Depth

30.6" (777mm)

Gross Weight

48 lbs (21.8 kg)

Front Panel

Buttons

Power On/Off button

System Reset button

LEDs

Power LED

Hard drive activity LED

2x Network activity LEDs

System Overheat LED / Fan fail LED / UID LED

Expansion Slots

PCI-Express

Expansion slots via riser card:

2x PCI-E 3.0 x16, Full-heigh Full-length

1x PCI-E 3.0 x8, Low-profile

1x PCI-E 3.0 x8 SAS3 integrated

Drive Bays

Hot-swap

8x 2.5" Hot-swap SAS3 drive bays

2x 2.5" Hot-swap SATA3 drive bays

System Cooling

Fans

8x heavy duty fans with optimal fan speed control

Air Shroud

1x Air Shroud

Power Supply

Type

750W Redundant AC-DC Power Supplies, +12V/+12Vsb output

AC Input

100-127Vac, 50-60Hz

200-240Vac, 50-60Hz

+12V

Max: 62.5A & Min: 0A (100Vac-127Vac)

Max: 62.5A & Min: 0A (200Vac-240Vac)

12V SB

Max: 2.1A

Min: 0A

PC Health Monitoring

CPU

Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.

CPU Core 6-Phase-switching voltage regulator

FAN

Total of ten 4-pin PWM fans

10x fans with tachometer monitoring

Status monitor for speed control

Status monitor for on/off control

Low noise fan speed control

Temperature

Monitoring for CPU and chassis environment

CPU thermal trip support

Thermal Control for 10x Fan Connectors

PSU I2C temperature sensing logic

Thermal Monitor 2 (TM2) support

PECI

LED

Power Fail / Overheat LED

Suspend-state Indicator LED

UID LED

Other Features

SDDC Support

Operating Environment / Compliance

RoHS

RoHS Compliant

Environmental Spec.

Operating Temperature: 10 C to 35 C (50 F to 95 F)

Non-operating Temperature: �� -40 C to 70 C (-40 F to 158 F)

Operating Relative Humidity:�� 8% to 90% (non-condensing)

Non-operating Relative Humidity:�� 5% to 95% (non-condensing)

Home